DOT Vision Requirements: What Medical Examiners Need to Know

Chapter 13 of 16 in The Complete NRCME Certification Guide

Quick answer

Under the traditional FMCSA vision standard, a driver generally needs at least 20/40 distant acuity in each eye separately and both eyes together, with or without correction; at least a 70-degree horizontal field in each eye; and the ability to recognize standard red, green, and amber traffic-signal colors. A driver who fails the worse-eye acuity or field requirement may be considered under 49 CFR 391.44 using Form MCSA-5871 and the alternative vision standard.

Test and document the traditional standard

Measure distant acuity for each eye separately and both eyes together, with correction when used. Document the result and whether corrective lenses are required. Assess the horizontal field for each eye using an accepted method and record the numerical finding. Evaluate recognition of red, green, and amber. Avoid vague entries such as “vision normal” because the federal form requires specific results and the standard applies to each eye.

Use corrective lenses accurately

Drivers may meet the acuity standard with corrective lenses. When correction is necessary, record the restriction consistently on the examination report and certificate or electronic record as applicable. Contact lenses and glasses are not interchangeable assumptions; document what was used during testing. A new prescription or recent surgery may require information about stability, complications, glare, contrast, diplopia, or adaptation beyond the basic acuity number.

Understand the alternate vision standard

49 CFR 391.44 provides a pathway for certain individuals who do not satisfy the worse-eye acuity or field requirement. The driver must obtain Form MCSA-5871 from an ophthalmologist or optometrist, and the Certified Medical Examiner must receive and consider it within the required timeframe, 45 days. The examiner independently determines whether the better eye meets the specified requirements and whether the vision deficiency is stable and sufficiently adapted for safe driving.

Consider more than Snellen acuity

The physical qualification decision may require attention to diplopia, progressive disease, visual-field loss, ocular motility, contrast problems, night vision, treatment effects, and the driver’s ability to recognize traffic signals and hazards. The eye specialist provides clinical findings; the examiner connects them to the regulatory pathway and CMV safety. Do not certify solely because a specialist uses the word “cleared.”

Document forms, timing, and interval

Retain Form MCSA-5871 as part of the examination record when the alternative standard is used, verify that it is complete and timely, and document the applicable result and restrictions. The alternative standard carries its own examination and certification framework, including annual examination expectations. Use current form instructions and avoid legacy federal vision-exemption materials that no longer describe the ordinary pathway for new qualifying cases.

Frequently Asked Questions

Is 20/40 required in both eyes?

Under the traditional standard, yes, for each eye separately and both eyes together, with or without correction.

What field of vision is required?

The traditional standard generally requires at least 70 degrees in the horizontal meridian in each eye.

Can monocular drivers qualify?

Some may qualify under the alternative vision standard if all requirements are met.

Who completes MCSA-5871?

An ophthalmologist or optometrist completes the vision evaluation; the Certified Medical Examiner makes the qualification decision.

Key Takeaways

  • Under the traditional FMCSA vision standard, a driver generally needs at least 20/40 distant acuity in each eye separately and both eyes together, with or without correction; at least a 70-degree horizontal field in each eye; and the ability to recognize standard red, green, and amber traffic-signal colors.
  • Federal vision exemptions no longer exist, having been replaced by the alternate vision standard.

Related Chapters

Official Sources